(1) Mistakes due to installation technology. It is a technically strong mechanical installation to install deep well submersible pump. If the installer is unfamiliar with the performance and construction of the pump, or does not install according to the operating procedures, it will cause a pump accident. This is often caused by improper assembly of the components of the pump, or due to improper operation, failure of the lifting device or sudden breakage, and the component or the whole is dropped into the well.

(2) Due to the unqualified quality of the pump. The submersible pump is generally qualified after inspection, but sometimes it is difficult to find hidden cracks in some parts due to the limitation of inspection instruments (especially casting parts); or the installation personnel are installed due to damage of the pipe during transportation. Before paying attention to inspection, this often happens after the pump has been running for a period of time, and the pump accident suddenly occurs, which is usually caused by the fracture of the coupling or the water pipe.

(3) Due to poor management. This type of pump-out accident occurs when the pump management system is not perfect, there is no one to take care of it, or someone without pump knowledge to take care of it. This is often caused by a glitch in the pump operation without the shutdown, and the pump is running with the disease.

Hebei Prime Pump Industry Technology Co., Ltd. is a 20-year professional manufacturer of submersible pumps. You are welcome to visit the factory. Phone: 17772607169